SPFlashV5 Multi Flasher Free By Miko Force With Login Working 100% Redmi 14C Lake / Pond Direct Global Flash-No Bootloader Unlock Needed Tested On OS 1.. & above

SPFlashV5 Multi Flasher ,By Miko Force combo makes flashing easier, faster, and completely free – no bootloader unlock, no Auth login, no keygen headaches. working with Xiaomi MediaTek devices

Highlights:

• Free to use with login
• Supports Redmi 14C Lake & Pond
• Direct Global ROM flashing
• No bootloader unlock required
• Auth bypass for Xiaomi MTK devices
• Tested on OS 1.. and above

Redmi 14C Lake / Pond – Global ROM Flashing:

You can now flash the official Global ROM directly-no need to unlock the bootloader. This method is safe, fast, and beginner-friendly.

Step Guide:

• Go to mifirm.net
• Search for Redmi 14C and download the official Global ROM
• Select the Global version
• Tick the box for Auto Convert Global ROM (only for Lake/Pond models)
• Click the Download button
• Use SPFlashV5 to flash the ROM — no bootloader unlock needed!

Supported OS Versions:

• OS 1.0.5.0 and above
• Fully supports OS 2.** series

Tested and working on OS 1..

This method lets you flash Xiaomi MediaTek devices without needing Auth login. Just follow these simple steps:

Step Instructions:

1️⃣ Open SPFlash Tool:

• Select your firmware
• Choose Firmware Upgrade
• Click Download

2️⃣ Put your phone into Fastboot mode

3️⃣ Run these commands one by one:

fastboot set_active b
fastboot reboot

✅ That’s it! The phone will reboot and start flashing -no Auth required.

🎁 Login Details:

- Email: admin@gmail.com
- Password: 123

HOW TO USE ?

• First, you need to download the zip file from the below link.
• Next, you can unzip all files at c: drive (important).
• Ensure you have disabled the antivirus before running the installation.
• Next, open the folder and install the setup file with some basic instruction.
• Run the shortcut from the desktop “MediateakV5.vmp.exe”.
• When prompted to log in, enter the credentials:
• Username: admin@gmail.com
• Password: 123
• Then click Login – the program should open within a few seconds.
• Next, you can install all drivers (included in the tool only need to one-click) if you already installed skip this step.
• Connect the phone and try to do any function.
• Enjoy !!!

Take a Backup: If you are willing to try the above tool, then please take a backup of your personal data from your Android Smartphone or Tablet. As flashing any Firmware or recovery may brick the device.

Credits: The Tool is created and distributed by the developer. So, full credits go to the developer for sharing the tool for free.